This ia a 4 axis lathe plus C-axis and live tooling provides the added advantage of robotic loading for unmanned chucking operations.
This machine boasts an integrated Mitsubishi 6 axis articulated robot. This requires no additional floor space and is positioned so it will not hinder the machine operation during set up, or whilst operating the Mitsubishi M70 control system.
This lathe can be fitted with a 42B or 60B collet chuck, or a 6 inch hydraulic chuck, and can be used for billets, castings or forged parts processing.
UP4-42SM / UP4-60SM
MACHINE FEATURES
The versatile tooling system allows complex components to be finished in one operation. The tooling design almost eliminates interference problems allowing the full compliment of tools to be utilized. Synchronized spindles allow rapid change from main to sub spindle. Simultaneous cutting on both main and sub spindles is also possible, depending on the work piece.
The central lubrication system forces lubricating oil to all sliding surfaces and ballscrews ensuring a long and trouble free service life.
Both spindles are cartridge type, pre-assembled and factory sealed, requiring no maintenance or lubrication. The complete spindle assembly is dynamically balanced after assembly to eliminate spindle vibration.
Each machine is supplied complete with chip conveyor, parts catcher, parts conveyor and bar feeder interface.
UG5-42M / UG5-60M / UG5-42MM / UG5-60MM
MACHINE FEATURES
These machines feature totally independent 2 axis tail stock system. The control system is capable of running 2 programs simultaneously. Major reduction in cycle times.
The unique design 5 axis linear guideway system allows for fast cycle times, accurate and stable machining, and a very flexible tooling system.
Both spindles are cartridge type, pre-assembled and factory sealed, requiring no maintenance or lubrication. The complete spindle assembly is dynamically balanced after assembly to eliminate spindle vibration.
UT series lathes complete machining of complex parts with ease. The servo turret is used as a tool change mechanism, eliminating the need to clear the workpiece, index, and reposition as required on turret machines. Make each second count with Chip-to-chip time of 1.8 seconds.
2 axis linear guideway system, unique design allows or fast cycle times, accurate and stable machining, and a very flexible tooling system.
This machine combines the features of the UT2 with the addition of a totally independent 2 axis tail stock system.
The control system is capable of running two programs simultaneously. Cycle times reduced by up to 50%.
CNC Slant Bed Lathe
YT-10/10T
Handy Series
YT-10 MACHINE FEATURES ：
Fanuc 0i Mate TC controller.
Gang
type 6 tools system.
YT-10T
MACHINE FEATURES ：
Fanuc
0i Mate TC controller.
8-position
turret is standard and the turret features
bi-directional, random tool selection
for quick tool change.
The
30 ° slant bed structure, it's facilitates
chip disposal and easy access to workpiece.
Square slideways on saddle for superior
stability.
Equipped with European-imported
with an additional chip wiper(patented).
Major parts are Meehanite
cast irons.
Spindle runs on precision
double-row roller bearing and angular contact
ball bearing.
Automatic lubrication
system delivers oil to all slideways and
ball screws.
YT-20L/200L
YT -20L / 200L MACHINE FEATURES
：
Fanuc 0i TC controller is standard.
Fanuc 18i TB is optional.
8-position turret is standard
and the turret features bi-directional,
random tool selection for quick
tool change. Upon request, a 12-position
turret is available(optional).
The 30 ° slant bed structure, it's
facilitates chip disposal and easy
access to workpiece.
Square slideways on saddle for superior
stability.
Equipped with European-imported
powerful cooling unit.
The machine interior
is equipped with an additional chip
wiper(patented).
Powerful 20HP spindle motor.
Major parts are Meehanite cast irons.
Spindle runs on precision double-row
roller bearing and angular contact
bearing.
Automatic
lubrication system delivers oil
to all slideways and ball screws.
Hydraulic tailstock features powerful
clamping force.
YT-450
YT-450 MACHINE FEATURES ：
Fanuc 0i TC controller is standard.
8-position
turret is standard and the turret features
bi-directional, randomtool selection for
quick tool change.
The
30 ° slant bed structure, it's facilitates
chip disposal and easy access to workpiece.
Square
slideways on saddle for superior stability.
Equipped
with European-imported powerful cooling
unit.
The machine interior is
equipped with an additional chip wiper(patented).
Big o 75m m spindle
bore gives heavier cutting capacity.
Powerful 20HP spindle
motor.
Major parts are Meehanite
cast irons.
Spindle runs on precision
double-row roller bearing and angular contact
bearing.
Automatic lubrication
system delivers oil to all slideways and ball
screws.
Hydraulic tailstock features
powerful clamping force.
YT-450L
YT-450L MACHINE FEATURES ：
Fanuc 0i TC controller is standard.
12-position
turret is standard and the turret features
bi-directional, randomtool selection for
quick tool change.
The
30 ° slant bed structure, it's facilitates
chip disposal and easy access to workpiece.
Square
slideways on saddle for superior stability.
Equipped
with European-imported powerful cooling
unit.
The machine interior is
equipped with an additional chip wiper(patented).
Big o 86m m spindle
bore gives heavier cutting capacity.
Powerful 20HP spindle
motor.
Major parts are Meehanite
cast irons.
Spindle runs on precision
double-row roller bearing and angular contact
bearing.
Automatic lubrication
system delivers oil to all slideways and ball
screws.
Hydraulic tailstock features
powerful clamping force.
The machine can equips with 4& 5 axis rotary table for 3D machining. 
